![\"\"](\"https:\/\/atlaslocator.com\/wp-content\/uploads\/2022\/12\/Mis-Dispositivos000.png\")
<\/a><\/figure>\nA monitored can have several associated devices, for example a temperature measuring device, a co2 measuring device, a lux measuring device,… all under the \u201cDining room\u201d monitored.
\n<\/p>\n\n
To register a device we must click on the +<\/p>\n\n And this window will open<\/p>\n\n You must give it a name and select the brand and model of your device (in the case of your own device there is a CUSTOM<\/strong> brand, it is the first option in the drop-down, it may be hidden and you need to upload it to discover it).
\n<\/p>\n\n And we will press the \u201cCreate and continue\u201d button.<\/p>\n\n Then we must define which network it is connected to (TTS (TTN & TTI), Helium…) for which we must press + to define the technology and operator fields.
\n<\/p>\n\n We will first select the Technology:<\/p>\n\n Then we will define the operator:<\/p>\n\n <\/p>\n\n Finally, the corresponding network integration protocols must be configured.
\n<\/p>\n\n Helium -> <\/strong>See more information on connection integration.<\/a>
\n<\/p>\n\n TTS (TTN & TTI)-><\/strong> See more integration information connection.<\/a>
\n<\/p>\n\n Once all the previous fields have been configured, we exit completely, saving the data entered until the main screen.
\n<\/p>\n\n And we click on the pencil of the device that we have just created, we find a new section, data labeling.
\n<\/p>\n\n This section is empty if the device has not yet received data.<\/p>\n\n When it receives them, it shows something like this:<\/p>\n\n Where we can see what type of data our device receives, know its value and date, define the nature of the data and even customize it with a name. There is an intelligent system that will define all these fields by default but you can always come and change them by hand.
\n<\/p>\n\n If we go back to the main screen:<\/p>\n\n In the bell symbol of the device we can define the alarms. You can only define one type of alarm from the device alarms, the alarm of lack of data for a period of time, so that it notifies us if it runs out of battery or loses coverage, etc. The rest of the alarms according to the data received are configured at the monitoring level (not at the device).
\n<\/p>\n\n An alarm to warn of a lack of data from a device would be created by clicking on the bell:
\n<\/p>\n\n Later in the +<\/p>\n\n And we will define the name of the alarm:<\/p>\n\n When we enter the name, more fields will be shown:<\/p>\n\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n<\/a><\/figure>\n